Save Money and Time: Learn How to Clean Your Spin Mop Head

So today, we are going to explain to you how to wash the spin mop head. A spin mop was designed as the solution for regular flat mops, which often absorb excess water when moping. Thanks to the water-squeezing function of your spin mop, you can balance the water level and clean the floor conveniently.

Moreover, the head of the spin mop can drag the hairs without pushing them here and there. Therefore, you need to keep the spin mop head clean regularly. When you clean it, the mop head should not be altered; otherwise, it will affect the performance of this tool. 

What you’ll need to Wash your Spin Mop Head?

If you use the washing machine, you will need warm water, and a mild detergent, apart from your washing machine.

If you follow the hand-washing method, you will need some warm water, a spacious bucket, some vinegar or a mild laundry detergent to clean the spin mod head. Sometimes, you have to use a scrub brush as well.

How to Remove the Mop Head? 

The way to remove the mop head from the handle can be varied from one to one. So, the user manual will be helpful to you for examining the mop head first before removing it. According to the pins and nuts that are used for the mop head, you have to unscrew them carefully. Then, you can twist the head in the direction that has been mentioned in the user manual.

If there is no information regarding that, try to twist the head in both directions slowly. Remember not to do it hard; otherwise, the structure of the mop can be damaged. If your mop head has some other attachments, such as a water-removing feature, make sure to remove them, too, before washing.

How to Pre-treat Stains? 

To remove the stain on the mop head, you can use some vinegar or mild laundry detergent. To make your own cleaning solution at home, pour some low-heat water into a bucket. Then measure half a cup of vinegar and mix it with the water. If you prefer detergent, you will need two tablespoons of laundry detergent to mix with the water. The mop head should be placed in the bucket to loosen all stubborn debris.

This pre-treatment is effective. But if the mop head is not too filthy, there is no need to do this step. You can directly follow the washing machine method. But this pre-treatment is an essential part of the hand-wash method.

How to Hand-Wash the Spin Mod Head? 

You can hand-wash the spin mop head following these easy steps. The method is as effective as the machine-wash method.

1. First, you should soak the mop head in warm water. To increase the effectiveness of soaking, you can mix some vinegar or a mild laundry detergent with the water, as we explained in the above section.
2. Secondly, you should put the mop head in the bucket for at least 12 to 15 hours if you use vinegar water. But 20 to 40 minutes will be enough for detergent water. Hot water plus vinegar/ detergent can remove most of the dirt and debris from the mop head.
3. After that, rinse the excessive water from the mop head. You will notice that the dirt and debris have dissolved in water. Soak the mop head in a bucket of cold water to remove any residue.
4. If there is still some debris on the mop head, you can use a scrub brush to scrub the mop head. A brush will be helpful to reach the corners of the head as well.
5. As the final step, you should let the mop head dry thoroughly and evenly.

How to Machine-Wash the Spin Mop Head? 

This is the most common method to clean the spin mop head. Most of the time, the mop comes with specific cleaning instructions from the manufacturer. You can go through the user manual to ensure whether there are any specific steps to follow while cleaning it.

1. First, the mop head should be removed from the handle.
2. Keep the mop head inside the machine. But make sure to put it on a delicate cycle.
3. Put a bit of mild detergent to clean the mop head. But it is not recommended to use too much; otherwise, the detergent residue will remain on the mop head.
4. After a few minutes, you should run the wash cycle with warm water to remove the detergent. You can give it a second wash with cold water if you like, but it is not necessary.
5. Lastly, let the mop head dry well. You can air-dry it by hanging it on a rack. But it would be better to avoid direct sunlight on the mop head because it can be faded.

How to Air-Dry the Spin Mop Head? 

After cleaning the mop head, it is a must to dry it too. To remove all the excess water from the mop head, you should hang it on the ceiling or any other tall rack, such as a shower rod. It would be best to choose a place on your patio to allow more free air circulation. But make sure not to allow direct sunlight on the mop head because harsh rays can fade or shrink it unnecessarily.

It is not a wise idea to lay the mop head for drying since it is time-consuming. And you have to turn its side from time to time. Otherwise, the mop head will not dry evenly. And you cannot keep it in the dryer. The reason why, the heat can damage the fibers of the mop over time.

Therefore, hanging is the best option when you want to dry a spin mop head.

Conclusion 

The spin mop is a highly beneficial tool for cleaning the floor. But you need to keep the mop head clean. If not, its effectiveness can be reduced. To clean the mop head, you can use a washing machine. The hand-wash method effectively works too. After cleaning, it is a must to air-dry the mop head before using it again. Refer to the above-mentioned step-by-step procedures.

Continue Exploring: More Articles to Keep You Engaged: 

• Can you Put Essential Oils in a Steam Mop?
• How to Clean a Polyester Couch?
• How to Clean Up Overflowed Toilet Water?
• How Much does a King Size Bed Frame Weight?