The Homedics Humidifier Is Not Working: Common Troubleshooting Tips

Homedics is a company that has more than 30 years of experience in home health innovations. Their main products are humidifiers and air purifiers. Humidity is the amount of water in the air. A proper level of humidity is required for good health. High humidity causes people to feel hot and can cause dehydration, fatigue, muscle cramps, heat exhaustion, fainting, and heat stroke. Low humidity can cause dry skin and hair, colds, and respiratory illness, allowing viruses and germs to thrive in breathing. Although Homedics is a very reputed brand, there will be instances where the humidifier may stop working. This article discusses the “Homedics Humidifier not working” and the reasons and how to avoid them.

Why Is My Homemade Humidifier Not Working?

There are many types of humidifiers in the market. Though they use different technologies, their end goal is to increase the water level of the air. To understand why a humidifier is not working, a basic knowledge of what humidity is and how the humidifiers work is required.

Humidity is the amount of water in the air at a certain temperature. The maximum amount of water in 1 cubic meter is 22g at 25 Celsius.

The humidifiers are divided into two basic categories: warm and cool mist. No matter the cool or warm mist, a humidifier should contain a mechanism to break the water into vapour. And then blow it into the air.

• Low water level or no water – Without water, the humidifier will not serve its purpose, even if the other parts are working.
• Humidistat setting is lower than current room humidity – When room humidity exceeds humidistat setting, humidifier won’t start.
• Wick filters need to be changed – a wick filter absorbs and distributes the water evenly. Over time, these filters become clogged, and the humidifier will not work correctly.
• The humidifier needs to be descaled – With time, mineral deposit buildups will block water paths and filters, which will cause the unit to malfunction.

How To Fix A Malfunctioning Homedics Humidifier?

Before fixing a malfunctioning homedics humidifier, troubleshooting should be done to identify the correct issue or issues.

• The first step is the power. The unit should be plugged in, and the power switch should be on. By checking the indicator bulb, it can be ensured that the administration is working correctly.
• The next step is to check whether the water level is above the minimum. Without water, the water mist will not come out. Filling the water tank to the maximum before switching on the humidifier will be a good idea.
• A humidifier works to maintain a certain water level in the air. If this water level is above the settings in the humidifier, it will not start. Increasing the humidistat level will make the humidifier work again.
• Wick filters are used to absorb the water and distribute it evenly. These filters are bound to get clogged with minerals and other debris in the water and block the water flow. If the filters are cleanable, they should be cleaned occasionally or replaced.
• With time, mineral deposit buildups and debris will block water paths and filters, especially if the humidifier is kept without use for some time. This will cause the unit to malfunction as the water flow is unexpected. In this case, the unit has to be cleaned part by part.

How Often Should I Clean My Homedics Humidifier?

Homedics advises cleaning the humidifier after every 60 hours of use, which means at least weekly. It is always important to keep the humidifier clean as the water it evaporates will be breathed in, and it will do more harm than good if it is not cleaned properly. The below list shows the indications that the humidifier is in a condition where it should be cleaned.

• Decreased mist output
• Unusual odour
• Visible mold or algae
• White dust accumulation
• Cleaning indicator light
• Unusual sounds

It is advisable to clean before the above symptoms appear.

How Do I Reset My Homedics Humidifier?

There is no specific button to reset a Homedics Humidifier. Once the power is switched off, the unit is reset. Keeping the team for a few minutes after switching off and then switching it on again is better. Resetting a humidifier is required when there is an issue with the unit. Usually, issues like red light or not turning on happen when there are problems with the setup. Resetting or switching off the power will not remedy the issue. The red light issue will be discussed later in this article, but the causes for the red light are simple and should be addressed, as ignoring them can cause the unit to be damaged and, more importantly, may cause serious health issues.

Homedics Humidifier Won’t Turn On After Cleaning.

Although a homedics humidifier is not a very complex home appliance, there are a few reasons why a Homedics humidifier will not start, especially after cleaning.

• Check the power connection and make sure the unit is switched on.
• Check the water tank and make sure the water is at an appropriate level. If the water tank is empty, the humidifier will not turn on.
• Check the humidistat for its position. If it is set to humidity below the room humidity, the humidifier will start once the room humidity goes down. The humidistat needs time to adjust to the environment after cleaning.
• Check the filter and ensure it is properly inserted and not clogged. If it is not properly inserted, the humidifier is turning on.
• Do not overfill the humidifier, which can cause the float switch/sensor to malfunction. This may prevent the humidifier from turning on.
• Do not use strong chemicals to clean the humidifier. In time, these chemicals will damage the parts in the humidifier and prevent it from turning on.

How Do We Fix The Homedics Humidifier Red Light Issue?

Homedic humidifiers show a red light warning light on various occasions.

• Low water level – The main reason for the red light issue is the low water level. This usually happens when the humidifier is kept on overnight, where there is a good chance of water running out during the night, and the light will be on by the morning. However, if the sensor is damaged, the indicator light will stay continuously on. Before replacing the sensor, there are other things one should consider: the following points.
• Humidifier needs cleaning – The red light will turn on if the humidifier needs cleaning. It is advisable to check the water level before starting cleaning. If the red light warning is not due to the water level, proper cleaning is required, including cleaning or replacing filters. The manufacturer recommends that the unit needs to be cleaned after 60 hours of working. To avoid the red light, it should cleaned at least once a week.
• Night light function – The nightlight function can cycle from 7 different colours, but you can set a fixed one by pressing the button again. If it happens to be set to red, a misleading message will be given.

How Long Does The Homedics Humidifier Last?

Depending on usage, a room humidifier will last two to five years. To get the maximum lifespan of a humidifier, it should go through the regular cleaning. Even well-maintained humidifiers are prone to the buildup of mineral deposits blocking the water paths. These deposits are hard to remove and gradually reduce the humidifier’s performance. Fans, motors, water seals, etc., may be replaceable, but issues like the buildup of mineral deposits will be hard to control.

Here’s An Interesting Video To Watch,

VIDEO CREDITS:  ADD is multitasking YouTube Channel

Continue Exploring: More Articles to Keep You Engaged

• Does a Humidifier Increase Oxygen? Humidifiers and Air Quality!
  
• How Long does It Take for a Humidifier to Work? Humidifier Efficiency!
• Why does My Humidifier Smell? Unraveling the Mystery!
• Humidifier Spitting Out Water – Here’s What You Can Do!